Illumination

The engineering of systems for quality inspection and industrial automation starts with the right illumination. The required color, the adequate shape and uncompromising quality ensure robustness against changes in ambient light and make characteristic features or defects visible for the optical inspection by cameras and software algorithms.

Angle Ringlight.

Direct Ringlight
LEDs with extremely bright light output are mounted very tightly. 360 degree shadow-free illumination is possible. The Direct Ring Light illuminates the object directly from a flat board. Suitable to detect smallest divergences of reflectance between target objects. Used for not reflecting objects needing a strong lighting

Angle Ringlight.
  • Angle Ringlight
    LEDs with extremely bright light output are mounted very tightly. 360 degree shadow-free illumination is possible. The Ring Light Direct Angle prevents shadowing and focuses the light at an angle to the centre of the object being illuminated. Suitable to detect smallest divergences of reflectance between target objects. Used for not reflecting objects needing a strong lighting. FLHC are “half models”. 
Low-Angle-Rignlights

Low Angle Ringlights (Darkfield)
LEDs with extremely bright light output are mounted very tightly. 360 degree shadow-free illumination is possible. The Direct Ring Light illuminates the object directly from a flat board. Suitable to detect smallest divergences of reflectance between target objects. Used for not reflecting objects needing a strong lighting.

Dome Lights

Dome Lights

Dome Lights allow shadow-free uniform light covering 180 degrees. For inspection of objects with glossy or non-flat surfaces or foil wrapped objects. The small FLDM-i50 is cylindric, all the others dome-shaped and illuminated from below. FHDM are equipped with high brightness LEDs to provide 360 degrees uniformity and larger coverage on the object area. FHDM operate at constant current sources in strobe mode. FFDQ is a flat square dome

Diffuse-flat-Ringlight
FLFL-Flat-Light

Diffuse flat Ring light

Ring-shaped light with overhead diffuse light eliminates LED glares and shadows for even illumination. Best for preventing halo effect. Coating inspection and burr inspection of the molding, soldering inspection and inspection of board parts possible with coned FLKR-type. Discus FLFR-type with its low height is preferred for very limited space.

FLFL Flat Light (Backlight)

Ring-shaped light with overhead diffuse light eliminates LED glares and shadows for even illumination. Best for preventing halo effect. Coating inspection and burr inspection of the molding, soldering inspection and inspection of board parts possible with coned FLKR-type. Discus FLFR-type with its low height is preferred for very limited space.

FLDL-TP-High-Intensity

FLDL-TP High Intensity Flat Light (Backlight)

Slim-type lighting with LEDs mounted at the bottom of the light guide to brighten it. LEDs are arranged at high intensity to produce high luminosity. Ideal for shilouette inspection.

Coaxial-Light
Barlight

Coaxial Light

Coaxial is a uniform light that runs perpendicular with camera axis across the entire field of view makes on-axis illumination system. FHFV possess High Power-SMDs.

Bar light

Bar-shaped lighting using high-intensity LEDs. They create optimum oblique lighting conditions. Flexible installation to enable a wide range of applications. Usable as high intensity surface lighting. Reflections can be controlled by the included diffusion plate.

Low Angle diffuse

Low-angle diffuse Light

LEDs with extremely bright light output are mounted very tightly. 360 degree shadow-free illumination is possible. The Direct Ring Light illuminates the object directly from a flat board. Suitable to detect smallest divergences of reflectance between target objects. Used for not reflecting objects needing a strong lighting.

Multi-Angle-Ringlight
IP Protection

Multi Angle Ring light

All in one lighting with multi color and multi angle. The arrangement of the LEDs allows an unprecedented level of illumination of the parts being inspected. Thus, various defects can be checked in a single measurement.

Lighting with higher IP-Protection

LED Lightings with Ingress Protection is required for many environmental conditions. In some of our product groups, you can already find lighting with various degrees of protection against against solid foreign bodies and water protection. If requested, all our LED Lightings can be manufactured up to IP67 

IP Protection

Infrarot Beleuchtung

For many applications, illuminations with lower light intensity are sufficient enough to obtain a perfect image. In addition, there is the sensitivity in the price, especially if higher volumes needed.  The new product line »FALCONeasy« was developed especially for large-scale projects in collaboration with regular customers. Instead of 3mm LED’s Standard, FALCONeasy line uses 5mm LED’s. The LED quality and housing design is the same. If SMD LED’s need to be (ex. Backlight / Coaxiallight…), we use another well-known manufacturer at a lower price.
We pass on the savings directly to our customers. This approach makes it possible to offer almost all Falcon lighting types also in the FALCONeasy line.

Sportlight
Ultraviolet
  • FHLV
    Specially designed condenser lens and rod lens are combined to emit highly uniform, high luminosity condensed light. High powered spot lights compatible with machine micro lenses.

  • FLSP
    Spot light to use in limited space provide a homogenous light through the diffuser plate.

  • FHSP
    Spot light with High-Power LED suitable and a Lens to use in limited space and long working distance up to 3 meters. Can be mounted on movable modules. Best for reading bar code/2D code.

Infrarot Beleuchtung

For many applications, illuminations with lower light intensity are sufficient enough to obtain a perfect image. In addition, there is the sensitivity in the price, especially if higher volumes needed.  The new product line »FALCON easy« was developed especially for large-scale projects in collaboration with regular customers. Instead of 3mm LED’s Standard, FALCON easy line uses 5mm LED’s. The LED quality and housing design is the same. If SMD LED’s need to be (ex. Backlight / Coaxial light…), we use another well-known manufacturer at a lower price.

stainless lighting

Stainless steel lightings

Hygienic safety is of paramount importance in the food, beverage and pharmaceutical industries. Stainless steel lightings from Falcon are available in various designs and light colors in a robust stainless steel housing (V2A, V4A).

Line-Lights

Line Lights

High brightness LED Line Light is focusing with an cylindrical lenses. A very intense illumination suited for the use with line-scan cameras. FHLN possess High Power-SMDs.

* Cr. Falcon